internal cargoModify Date : 2020-08-11 10:14:42

negative/static refractories

refractory mortar (REFRACTORY MORTARS)
The refractory mortar is used as a bonding material for construction with refractory ducts.
The quality of the refractory kite, as a refractory, is generally the same as the refractory kite.
It's used.
Therefore, the refractory mortar has a direct effect on the refractory duct.
It will go crazy, so after construction, it will be caused by dry sintering.
Less shrinkage, less constructivity, ductility, adhesion, etc.
Excellence is especially required.

PLASTIC REFRACTORIES
plastic refractory is plastic to dense refractory aggregate
Use clay, chemical bonding materials and water, mixed clay
State of the mixture according to the purpose of use as a refractory of the condition.
Or, it is supplied to the place of use as a plate.
In addition, any constructor is equipped with a Hammer or an Air Rammer.
It can be constructed on the part of use, so the width of use gradually expands.
It's on the way.

ACID PROOF CASTABLE & MASTIC COATING
■ Acid-resistant castable
   The acid-resistant castable is resistant to acids.
   Various petrochemical, anti-pollution facilities, etc. are excellent.
   in acidic gas or about Alkali.
   It is widely used to prevent damage caused by damage.
   There is.

■ MASTIC Coating Material
   MASTIC Coating Material Starting with Asphalt Material
   Mix the raw materials with acid-resistant pigments.
   a product on a paste that dissolves it as a solvent.
   as waterproof, acid resistant, alkaline, and corrosion resistant
   have an excellent back
   For important purposes, the surface of the insulation workpiece should be covered.
   Coating is used to promote domestic demand and wind resistance.
   Between the acid-resistant castable and the iron skin in the cartilage.
   The construction of the forms a layer of acid resistance.
   Mainly used and also refractory castables.
   Iron by coating the surface of Anchor during construction
   an expansion table that absorbs the expansion of anchor.
   It also serves as a (膨脹帶) player.

SELF FLOWING CASTABLES
Recent methods of irregular construction of urinary tract
Inflow construction is being carried out for cost reduction purposes.
Usually, when an inflow is made public, liquidity is increased and loyalty is increased.
Constructed with a beacon Vibrator, etc. for improvement, but constructed
If the gap is narrow, a filling defect will occur, which will improve the gap.
This is the situation that is required.
This product is made of fine induction composition and the use of super-differentiated additives.
Superior liquidity in even a small amount of water, self-fulfilling
It has functions to reduce cost and improve working environment.
It is possible, because we used a very small amount of Al2O3 Ceal.
Due to its excellent heat resistance characteristics, the operating conditions are harsh, and the water bath is good.
It can also be adapted to the material of the contact area, it can be used for use
There are a variety of choices.

LOW CEMENT CASTABLES
LOW CEMENT CASTABLES:
Using the distributed cohesion effect of super-differentiated raw materials and special binder
so that it is dense and high-intensity by low water.
Constructing constructors, minimizing the use of Alumina Cession
This castable has excellent thermal characteristics.

1. Dense work can be done with low water.
2. Superior abrasion resistance; high corrosion resistance
3. High intensity in electric temperature area
4. Excellent internal spalling ability
5. Excellent thermal volume stability

Insulation (lightweight) castable refractory (INSULATING CASTABLE REFRACTORIES)
Insulation castables are made of lightweight refractory aggregates with excellent insulation.
Combinations are manufactured by mixing them, so they have fire resistance and insulation effects.
It's an internal cargo that can be obtained at the same time.
It is also highly constructible, so it is constructed with insulation ducting.
It can be constructed even in difficult areas, so the demand for it has recently increased.
It's getting harder and harder and harder.

CASTABLE REFRACTORIES
 
Castable refractory materials provide adequate access to fire resistant aggregates.
Constructed and using alumina cement as a bonding material
Add an appropriate amount of refractory as an internal substance on a powder made of honk.
a substance that results in strength by hydration reaction.
That's right.
Our company has various conditions, such as where to use, purpose, temperature of use, etc.
Produce and supply castable refractories suitable for and characteristics.
There is.

------------------------------------------------

Orthotropic refractory

Acid resistance, heat resistance and (ACID PROOF, ACID-HEAT PROOF FIRE BRICKS)
Refrigeration and heat-resisting kites in the chemical industry, and
Combustion-proofing kites used for internal lamps of various wastewater treatment tanks;
That's right.
We have years of technology and experience, and we're going to be able to help demand demand.
We are producing and supplying suitable products.

SPECIAL INSULATING FIRE BRICKS
Special refractory insulating alveolar furnace has specially refined fuel
Used and manufactured with strict process control at high temperatures.
Very high thermal stability and excellent thermal shock resistance.
under the atmosphere of reduction or other inert GAS.
Because of its excellent resistance to reduction, it has various moods (雰圍氣爐)
It is widely used as a built-in material for .

INSULATING FIRE BRICKS
Fireproof insulation kites are porous and have excellent insulation strength.
Because I have it, the heat in the loins is open.
To prevent spillage and operate in a short period of time on a small annual basis.
It can be heated to a temperature, so it can save fuel.
I have the advantage of it.
In addition, excellent insulation helps reduce the thickness of the wall
Energy such as reducing construction costs and improving productivity
It has a lot of effect on saving.

CASTING & MOLDING REFRACTORIES
 
The pattern of the latest casting operation is in continuous casting form.
The demand for refractory materials has changed dramatically.
It's decreasing. However, a variety of small-volume products,
High quality products are required for large cast steel products.
We also have a wide range of customers based on our long experience.
We're going to make a lot of quality products to meet your needs.
We are producing and supplying.

common-plastic magnesia, chrome-magnesian kites
(MgO, Cr2O3-MgO BRICKS)
 
with a select high purity magnesian crinker and chromium ore.
magnesia and chromium magnesia of ordinary plastic products manufactured.
Kites are used for steel mills, glass furnaces, and various urinals that require high resistance.
We produce and supply the right product for the intended use of the consumer.
For high-pressure plastic, high-temperature plastic, and other state-of-the-art facilities.
We are focusing on producing excellent products.

hydrocarbon silicate kites (SiC BRICKS)
Carbonated silicate kites have high thermal conductivity, low thermal expandability,
With excellent quality characteristics such as strong thermal shock resistance, resistance, etc.
It is widely used as a refractory for urinary tract.
There is. Especially, the use of the urethra is limited.
Wide, non-ferrous metal furnaces and runners, other muffles
It is well received for being used as Tile.

SPECIAL FIRE CLAY BRICKS
With the recent enlargement of the urinary tract, the requirements of the place of use are:
As it becomes more severe, special clay kites with high durability
It's being demanded.
We use a low-flying chamotte, high-pressure molding,
We produce and supply special clay ointment for high temperature.
Especially in this kite, my spalling, abrasion resistance, and corrosion resistance.
It is very good and is receiving favorable reviews from customers.

clay kites (FIRE CLAY BRICKS)
Clay kites are silica-Alumina-based fire-resistant kites.
Thermal stability at high temperatures is high and its range of use is high.
Because it is relatively wide, it is most likely to be in the industrial urinary tract.
It is used for a wide range of purposes.
Based on our long experience and technology, we are using
We are producing and supplying products suitable for characteristics.

SPECIAL HIGH ALUMINA BRICKS
according to the trend of diversification into industry and advancement of production products.
The conditions of use of refractories are getting severe.
In order to respond to these changes, we have a variety of
Produce and supply products with characteristics that meet the conditions
There is.

High Alumina BRICKS
Silimanite, Bauxite, Fused
High quality raw materials such as Alumina and Mulite are adjusted for input,
It is manufactured by high-pressure plasticizer, high-temperature plasticizer.
Our company has the latest high-pressure auto-friction free and hydrolic
The forming facilities of pressure lamps and the T/K, S/K, etc. at high temperature and high temperature.
Introduce plastic facilities to produce excellent products and produce products.
It is the first of its kind in Korea to offer high-aluminosis kites and two-class specialties.
K for Grade 1, 2, 3S display permission has been obtained.