Ceiling steel support materialModify Date : 2020-07-17 11:55:17

M-BAR SYSTEM (19-,25-type)
M-BAR SYSTEM is a KS19 and KS25 type Korean industrial standard product. It is the most robust and commonly used product. It is a SYSTEM that is widely used in almost all buildings such as offices, shopping malls, and residential complexes as it has a free choice of finishing materials such as house-sum board, dark-sound board, AL, and zinc-coloured steel sheet products, and creates cool and tinted spaces with no BARs.

Overview of SQ-BAR SYSTEM

The AL TILE system, the most commonly used metal finish applied to the interior and exterior ceilings of buildings, was adopted as a CLIP-IN fixed method, raising the risk of elimination when used for external canopy and filotiation, and causing the elimination of the metal to occur due to the actual wind. The wind-resistant SQ-BAR SYSEM, developed by Yoo Chang, uses SCREW fixed method to improve robustness to secure wind-resistant pressure performance, and forms a 15mm or 20mm point line to secure a beautiful appearance.
SQ-BAR SYSTEM (for wind-resistant pressure) products

(1) Material
Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3609 (Forced Building Material)
(2) Specifications
1 SQ-BAR : 30X40X0.45T or higher
2 Wind-resistant ballT: 15mm (L=1,200 or less) or 20mm (1,600 or less)
3 HANGER & BEES : 32X160X2.0T
4 HANGER NUT : ψ9
5 SQ-BAR JOINT : 0.6T
6 SQ-BAR CLIP & BEES : 0.8T
7 SQ-RUNNER : 32x40x0.6T or higher
8 AL MAIN JOINER: Width = 15MM, L=3,690
9 AL CROSS JOINER & CLIP: Width = 15MM, L=600
10 MOLDING: 37X18X1.0T
11 SUS Fixed Clips

SQ-BAR SYSTEM (for wind-resistant pressure) features

* External canopy/pilotti, high ceiling where it is difficult to check the lobby light of buildings, etc.
* Structural frame for wind-resistant pressure ensures the best performance for wind pressure
* Gain high productivity and economic feasibility with the same production method as AL TILE.

Overview of SQ-BAR SYSTEM
SQ-BAR has excellent cross-sectional performance by forming a closed-BAR by forming galvanized steel plate in a quadrilateral form, and has a strain resistance due to long-term load after construction and a dustproof/resistance to earthquakes. It minimizes interference with equipment air conditioning facilities and bolts inside the ceiling, simplifies construction work, and leads the process with facility construction.It is a lightweight ceiling frame that takes into account the liquidity of the trailing process.
SQ-BAR SYSTEM PRODUCT

(1) Material
Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3609 (Forced Building Material)
(2) Specifications

1 SQ-BAR
Upper: 30X40X0.4T or higher
Lower : Same member as upper
2 HANGER BOLT: 9mm X 1,000
3 HANGER & BEES : 32X160X2.0T
4 HANGER NUT : ψ9
5 SQ-BAR JOINT : 0.6T
6 SQ-BAR CLIP & BEES : 0.8T
7 SQ-RUNNER : 32x40x0.6T or higher
8 Daldae Bracket: 1.0T or higher, L= Ordering ledger
9MOLDING: Follow the drawing.

SQ-BAR SYSTEM Features

* Minimize interference with air conditioning facilities by using SQ BAR
* Excellent durability
* For construction purposes due to reduction of accessories
* Suitable for weight ceiling

Overview of SQ-BAR SYSTEM
SQ-BAR has excellent cross-sectional performance by forming a closed-BAR by forming galvanized steel plate in a quadrilateral form, and has a strain resistance due to long-term load after construction and a dustproof/resistance to earthquakes. It minimizes interference with equipment air conditioning facilities and bolts inside the ceiling, simplifies construction work, and leads the process with facility construction.It is a lightweight ceiling frame that takes into account the liquidity of the trailing process.
SQ-BAR SYSTEM (STAM) PRODUCT
(1) Material
Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3609 (Forced Building Material)

(2) Specifications
1 SQ-BAR : 30x40x0.4T
2 SQ-RUNNER : 30x32x0.6T
3rd month bracket (top-tooth type) 1.2T, L=order dimension used to reinforce A-TYPE
4 MINOR CHANNEL KS Type 25 : Used for reinforcement of 10x25x1.2T B-TYPE
5 SQ-BAR JOINT "-" : 0.6T
6 SQ-BAR JOINT "G" : 0.6T
7 SQ/M-CLIP " 0.6T
8 HANGER NUT : ψ9 or ψ6
9 HANGER : 20x50x2.0T
10 HANGER BOLT: 6mm, or 9mm, L=Order dimensions
SQ-BAR SYSTEM features
* Constructability: reduced types of subsidiary materials make it easier to install
* Economical: Easy to construct, reducing construction costs.
* Safety: Rigid, undisturbed ceiling
* Appearance: Concealed type does not show the bar.
* Non-flammable: Steel structures using galvanized steel plates

FURRING CHANNEL SYSTEM

APTM-BAR 36

J/M-BAR SYSTEM General Aspects
(1) Terms definition
System : J/M-BAR SYSTEM
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, title, dimensions, date of manufacture, etc. on the label
2 Handling : Handling according to the manufacturer's instructions and the user's precautions
J/M-BAR SYSTEM PRODUCT
(1) ash ry
KSD 3506 (Steel of molten galvanized iron)
(2) Discipline
A. HANGING System
□ For 45mm from BRACKET (40t) upper slab to ceiling closing surface.
□ HANGER BOLT (Φ6mm×200mm): For 140mm to 200mm from the upper slab to the ceiling closing surface.
□ NUT (Φ6mm)
I. FRAME Materials
□ CARRIER (1.2T×25mm ×12mm): All-in-one wings
□ M-BAR (0.45t×50mm×14mm)
□ Wood for moulding (33mm × 33mm)
D.A.Substituted steel
□ Hiltipin (1/4 inch): For fixing BRACKET on the upper slab
□ Hiltipine (DN 52) For immobilizing wood
□ MetalScrew (44mm×25mm): Flathead self-drilling screw
□ Insert (Φ4mm × 36mm)
□ Ball-tree (Φ4mm × 32mm)
Ra. Gi Ta
□ Curtain box: Steam drying items with a moisture content of 15% or less
□ Molded (PVC) : Specified standard
J/M-BAR SYSTEM Features
* Appearance: Concealed type does not show the bar.
* Safety of structural steel: Stiff and undisturbed ceiling
* Non-flammable: Steel structures using galvanized steel plates
* Install inserts in the slab structure to provide a complete structure
* Horizontal control function: Full horizontal plane is possible.
* Easy to adjust ceiling height.

STEEL T-BAR 15mm Overview
T-BAR SYSTEM is a ceiling system that makes use of aesthetic sense and practicality at the same time. It can act as an inspection tool in all sections installed. It is easy to repair and inspect wiring and pipes. It is suitable for all parts of the building such as general office and shopping mall. The 15mm product is cool due to its narrow width.
STEEL T-BAR 15mm PRODUCT

(1) Material
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD3520 (Coating Copper-Coated galvanized steel plate)
KSD 3609 (Building Compulsory Support Material:T-BAR, etc.)
2 Color: White (standard color), Outsourced color

(2) Specifications
1 STEEL MAIN T-BAR : 15mm X38mm X 0.4T (General L=3658; Zibart L=3600)
2 STEEL CROSS T-BAR : 15mm X25mm X 0.4T (General L=610, Zibart L=600)
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X20mm X 2.0T
5 CARRYING CHANNEL : 38mm X12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
7 C/T CLIP (for STEEL T-BAR)
8 MINOR CHANNEL : 19mm X 10mmX 1.2T
9 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
11 MOLDING (for STEEL T-BAR)
12 ANGLE MOLDING: 22mm X 32mmX 0.5T
13 DOUBLE MOLDING: 15mm X 10mmX 15mm X 24mm X 0.5T
STEEL T-BAR 15mm Features

* Construction is fast and simple.
* You can act as an inspection tool anywhere on the ceiling plate.
* The width of the bar is so narrow that it is beautiful.
* Create a plaid ceiling to eliminate monotony.

STEL T-BAR 25mm General Aspects
1) Terms definition
1 System : STEEL T-BAR SYSTEM
2 Gong Act: LAY-IN (TYPE with ceiling panel on ceiling frame)
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, title, dimensions, date of manufacture, etc. on the label
2 Handling: Handle according to the manufacturer's instructions and the user's precautions.
STEEL T-BAR 25mm PRODUCT
(1) Material
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD3520 (Coating Copper-Coated galvanized steel plate)
KSD 3609 (Building Compulsory Support Material:T-BAR, etc.)
2 Color: White (standard color), Outsourced color
(2) Discipline
1 STEEL MAIN T-BAR : 25mm X 38mm X 0.4T (General L=3658; Zibart L=3600)
2 STEEL CROSS T-BAR : 25mm X 25mm X 0.4T (General L=610, Zibart L=600)
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X20mm X 2.0T
5 CARRYING CHANNEL : 38mm X12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
7 C/T CLIP (for STEEL T-BAR)
8 MINOR CHANNEL : 19mm X 10mmX 1.2T
9 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
11 MOLDING (for STEEL T-BAR)
12 ANGLE MOLDING: 22mm X 32mmX 0.5T
13 DOUBLE MOLDING: 15mm X 10mmX 15mm X 24mm X 0.5T
STEEL T-BAR 25mm Features
* Construction is fast and simple.
* You can act as an inspection tool anywhere on the ceiling plate.
* The width of the bar is modern and elegant.
* Create a plaid ceiling to eliminate monotony.

AL Ω T-BAR General Aspects
(1) Terms definition
1 System : AL Ω T-BAR SYSTEM
2 Gong Act: LAY-IN (TYPE with ceiling panel on ceiling frame)
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, title, dimensions, date of manufacture, etc. on the label
2 Handling : Handling according to the manufacturer's instructions and the user's precautions
AL Ω T-BAR Products
(1) Material
1 Color: White (standard color), and other order colors
(2) Discipline
1 AL Ω MAIN T-BAR : 25mm X 38mm X 1.2T (General L=3600)
2 AL Ω CROSS T-BAR : 25mm X 38mm X 1.2T (General L=600)
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X20mm X 2.0T
5 CARRYING CHANNEL : 38mm X12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X1.2T
7 C/T CLIP (for AL Ω T-BAR)
8 MINOR CHANNEL : 19mm X 10mmX 1.2T
9 M/C CLIP: 38mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
11 MOLDING (for AL Ω T-BAR)
12 ANGLE MOLDING: 22mm X 32mm X 0.5T
13 DOUBLE MOLDING: 15mm X 10mm X 15mm X 24mm X 0.5T
AL Ω T-BAR Features
* Construction is fast and simple.
* You can act as an inspection tool anywhere on the ceiling plate.
* The width of the bar is so narrow that it is beautiful.
* Create a plaid ceiling to eliminate monotony.
* The upper runner is practical by mounting it in the groove of the bar.

T-BAR 50mm overview for AL mesh

Aluminum T ? developed to make it easier to construct metal mesh ceiling plates that are used in noisy places with high ceilings and spacious floors such as fitness centers and discount stores ?The BAR system provides a complete mesh ceiling, including a specially designed T-BAR and T-CLIP, and a hangar system developed for direct suspension.

T-BAR 50mm configuration for AL mesh

(1) Material
Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3609 (Forced Building Material)
(2) Specifications

1 AL MAIN T-BAR : 50X43X1.5T

2 AL CROSS T-BAR : 50X43X1.5T

3 HANGER BOLT: 9mm X 1,000

4 HANGER & PIN: 105X20X2.0T

5 HANGER NUT : ψ9

6 MOLDING (for AL T-BAR)
7 WIRE MESH : 900X900 or Order Size
T-BAR 50mm feature for AL mesh

* Open ceiling provides openness.
* Good for noise reduction
* Easy to construct with direct frequency

General Aspects of Line Tiva Indirect Suspension System
(1) Terms definition
1 System: LINE T-BAR SYSTEM (Indirect Suspension Method)
2 Gong Act: LAY-IN (TYPE with designated finish panel on ceiling frame)
3 Condensation Method: Indirect Suspension
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, title, dimensions, date of manufacture, etc. on the label
2 Handling: Handling according to producer's instructions and user's precautions
Products of Line Tiva Indirect Suspension System
(1) Material
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3520 (Coating Coated Zinc Plates)
KSD 3609 (Forced Support Material for Building)
2 Color: White (internal: black or white) is the standard, and other colors are agreed upon.
3 Surface treatment: Polyester resin coating (20 micron or higher)
(2) Specifications
1 MAIN LINE T-BAR : 15mm X 42mm X 0.4T
2 CROSS LINE T-BAR : 15mm X 42mm X 0.4T
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X20mm X 2.0T
5 CARRYING CHANNEL : 38mm X12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
7 C/T CLIP (for LINE T-BAR)
8 MINOR CHANNEL : 19mm X 10mmX 1.2T
9 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
Characteristics of Line Tiva Indirect Suspension System
* Easily level the ceiling
* Capable of acting as an inspection tool anywhere on the ceiling.
* Maintains a strong ceiling frame
* The connection between the main bar and the crossbar is smooth and beautiful.
* Grid pattern gives a refreshing feeling.
* The bar is narrow enough to create a cool ceiling.

General Aspects of Line Tiva Direct Suspension System

(1) Terms definition
1 System: LINE T-BAR SYSTEM (Direct Suspension Method )
2 Gong Act: LAY-IN (TYPE with designated finish panel on ceiling frame)
3 Method of adhesion: Direct suspension
(2) Transportation and Handling
1 Transport after packing: type, title, dimensions, date of manufacture, etc. by specifying them on the label.
2 Handling: Handling according to the manufacturer's instructions and the user's precautions
Products of Line Tiva Direct Suspension System

(1) ash rye
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3520 (Coating Coated Zinc Plates)
KSD 3609 (Forced Support Material for Building)
2 Color: White (internal: black or white) is the standard, and other colors are agreed upon.
3 Surface treatment: Polyester resin coating (20 micron or higher)
(2) Discipline
1 MAIN LINE T-BAR : 15mm X 42mm X 0.4T
2 CROSS LINE T-BAR : 15mm X 42mm X 0.4T
3 HANGER WIRE: ψ2mm
4 HALL DAWN CLIP
Characteristics of Line Tiva Direct Suspension System
* It's economical.
* Capable of acting as an inspection tool anywhere on the ceiling.
* Maintains a strong ceiling frame
* The connection between the main bar and the crossbar is smooth and beautiful.
* Grid pattern gives a refreshing feeling.
* The bar is narrow enough to create a cool ceiling.

T & H BAR SYSTEM General Aspects
(1) Terms definition
1 System : STEEL T & H-BAR SYSTEM
2 Gong Act: LAY-IN (Little Ceiling Plate connected with H-BAR) and the ceiling panel enlarged to the ceiling frame.
TOP UP TYPE)
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, title, dimensions, date of manufacture, etc. on the label
2 Handling: Handling according to the manufacturer's instructions and the user's precautions
T & H BAR SYSTEM PRODUCT

(1) Material
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3520 (Coating Coating Copper)
KSD 3609 (Building Compulsory Support Material:T-BAR, etc.)
2 Color: White (standard color), and other order colors
(2) Specifications
1 STEEL MAIN T-BAR : 25mm X 38mm X 0.4T
2 STEL CROSS H-BAR: 20mm X 20mm X 0.45T
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X 20mm X 2.0T
5 CARRYING CHANNEL : 38mm X 12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
7 C/T CLIP (for STEEL T-BAR)
8 MINOR CHANNEL : 19mm X 10mm X 1.2T
9 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
11 MOLDING (for STEEL T-BAR)
12ANGLE MOLDING: 22mm X 32mm X 0.5T
13DOUBLE MOLDING: 15mm X 10mm X 15mm X 24mm X 0.5T
T & H BAR SYSTEM Features
* Construction is fast and simple.
* Checkers on the ceiling plate can be installed anywhere using the access bar.
* The width of the bar is modern and elegant.
* Create the ceiling of a large module to create an open space.

STEEL MODULE BAR Type 70 General Aspects
(1) Terms definition
1 System : MODULE T&H-BAR SYSTEM
2 Gong Act: LAY-IN (TYPE with ceiling panel on ceiling frame)
(2) Transportation and Handling
1 Transport: Delivery after packing by specifying the type, finishing, manufacturing date, label, etc. of the product
2 Handling: Handle according to the manufacturer's instructions and the user's precautions.
STEEL MODULE BAR Type 70 Products
(1) Material
1 Material quality: KSD 3506 (Helted galvanized steel plate)
KSD 3520 (Coating Coating Copper)
KSD 3609 (Building Compulsory Support Material:T-BAR, etc.)
2 Color: White (standard color), and other order colors
(2) Specifications
1 STEEL-MODULE T-BAR : 70mm X 38mm X 0.6T
2 STEL CROSS H-BAR: 20mm X 20mm X 0.45T
3 HANGER BOLT: ψ9mm
4 HANGER & PIN: 105mm X 20mm X 2.0T
5 CARRYING CHANNEL : 38mm X 12mm X 1.2T
6 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
7 C/T CLIP (for STEEL T-BAR)
8 MINOR CHANNEL : 19mm X 10mm X 1.2T
9 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
10 HANGER NUT: ψ9mm
11 MOLDING (for STEEL T-BAR)
12ANGLE MOLDING: 22mm X 32mm X 0.5T
13DOUBLE MOLDING: 15mm X 10mm X 15mm X 24mm X 0.5T
STEEL MODULE BAR Type 70 Features
* Construction is fast and simple.
* Checkers on the ceiling plate can be installed anywhere using the access bar.
* The width of the bar is modern and elegant.
* Create the ceiling of a large module to create an open space.
* Air conditioning can be installed on the bar.

CLIP-BAR Overview
Among the colored metal ceiling materials, two types of clip bars (for aluminum tiles) and J-type clip bars (for color zinc steel plates) were developed to simplify the construction of tiles. Simply insert the metal ceiling tile into the clip bar attached to the carring channel and complete the construction.
CLIP-BAR Configuration
(1) ash rye
Material quality: KSD 7081 (Architectural Colouring Metal Ceiling Material)
KSD 3609 (Forced Building Material)
(2) Specifications
1 HANGER BOLT: ψ9mm X 1,000mm
2 HANGER & PIN: 105mm X 20mm X 2.0T
3 HANGER NUT: ψ9mm
4 CARRYING CHANNEL : 38mm X 12mm X 1.2T
5 C/C JOINT: 100mm X 35mm X 10mm X 1.0T
6 MINOR CHANNEL : 19mm X 10mm X 1.2T
7 M/C CLIP: 38mm X 23mm X 14mm X 1.2T
8 CLIP-BAR: 24 X 35 X 0.5T
9 CLIP-BAR JOINT: 100mm x 35mm x 0.5T
10 WIRE CLIP : ψ2mm
CLIP-BAR Features
* Appearance: Concealed type does not show the bar.
* Safety: Rigid, undisturbed ceiling
* Non-flammable: Steel structures using galvanized steel plates
* Vertical coupling makes construction easier.
* Horizontal controls: Full horizontal plane possible.