Electric fanModify Date : 2018-11-12 20:07:36

 

■ High efficiency heating system

Power switching system (relay method)

It reduces heat loss by reducing connection resistance by connecting contacts to power supply supplied to electric heater.

Relay reduces connection resistance and noise

Advanced Artificial Intelligence System >>>> Input Voltage Regulation >>>> Power Saving System

▶ Advanced Artificial Intelligence System

  Designed as a multi-level safety device for stability, advanced artificial intelligence system with functions such as temperature control, scheduled heating, and self-diagnosis system

▶ Input Voltage Control

  Function to adjust input voltage (1Ø 220V, 3Ø 220V, 3Ø 380V 4-wire type) according to the installation location to facilitate the distribution of customer power according to the installation or transfer of the heater.

▶ Power Saving System

  By designing watt density (W / ㎡) below 5, heat dissipation fin is applied to self-produced sheath heater that has 99.7% of thermal efficiency.

▶ Low noise method

  Adopts the relay method and eliminates the smell and noise

■ Air Clean Filter System

  The air cleaning filter is a device that sucks air and passes the filter in three stages so that clean, fresh wind comes out.

1. Prefilter

  It removes dust of relatively large particles while inhaling air, and prevents large foreign substances from entering the product.

2. HEPA Filter

  The filter made of special electrified fiber is passed through the air to remove fine contaminants larger than 0.3㎛ such as dust, mites, fine dust, viruses, molds, etc.

3. Carbon Filter

  The carbon filter made of activated carbon filter purifies the air by removing odor, odor, tobacco smoke, pet odor and food odor with strong adsorption power.

Thermal Efficiency

 It is designed to reduce the preheating time by 430 stainless radiating fins and to release heat and hot air quickly. Therefore, it is cheaper to maintain than oil heaters and can save up to 40 ~ 50% depending on the type of product.

Auto Swing

 All ENERZEN models are equipped with autoswinging capabilities, allowing them to spread quickly to areas with a wide range of heating directions.

Noise Reduction

 By using the relay contact method, noise was eliminated during operation, and the life of the product was extended by enabling safe control using the relay contact method. In addition, the internal structure is minimized to minimize the noise of the blowing air.

 Multiplex Safety System

 By adopting the overheat prevention sensor and the heater temperature sensor in double, the safety is secured through indoor temperature detection, double overheat prevention and double heater temperature detection.

User Convenience

 It is equipped with self-diagnosis function, scheduled operation function, automatic temperature sensing function, and it is manufactured to be operated by remote control.

Pleasant Heating

 It does not generate soot, dust, or odor generated from heaters made by burning fuel, and does not generate oxygen deficiency caused by long time operation. It does not occur.

After Service

 ENERZEN is confident in the quality of the product, which has a two-year free warranty period.

Workplace

Install in a place where the entire heating area is difficult, such as a factory or a workshop with a large site!

Where many people come and go

Please install in places where many customers such as outdoor stores in the shopping center !!

Install in a place with high risk of fire due to the large number of floating population !!

Always crowded

Install in a place where oxygen deficiency phenomenon (cause of combustion and exhaust gas) can occur because there are many people who live in a narrow place !!!

Large store or restaurant

Because there is a blind spot of heating, please install in a difficult place to every corner !!!!

Where heating is required for a long time

Need a comfortable heating 24 hours, but please install in a place with a lot of fuel consumption!

Inability to ventilate frequently

It needs to be heated for a long time, so install it where there is inconvenience to inject fuel.

(All models 3 phase 3 Ø 220V order production.)