+82-071-4111-0155
Lifting magnetModify Date : 2018-11-13 08:16:00
■ Billet Transfer (HLMB series)
| |
Characteristic | -Attraction force maximized through optimized York structure -Quick demagnetization time minimizes idle time -Prevents malfunction of magnet pot due to overheating by installing temperature sensor in magnet pot -By attaching a separate working shoe, it is possible to cope with the change of billet size within the proper range. |
Usage | -Billet transfer in steel and steel making facilities |
Specification | Product Specifications
 #One. The above specification is based on a 12m billet and may vary depending on the shape, surface condition and deformation of the billet. #2. Usage rates can be changed to meet customer license terms. # 3. The product specifications in the above table are when the billet and the ambient temperature are below 50 ℃, and the product specifications may change when used in high temperature conditions. #4. Overheat temperature sensor is optional. # 5. An optional digital drive that automatically controls the temperature and performance of the electromagnet is available. # 6. Large or high temperature products not listed in the above table can also be manufactured and supplied. NOTE: Please contact our sales department before selecting a product.
|
■ Round Electronic Lifting Magnet
| |
Characteristic | The hoist crane is suitable for transporting or sorting steel plate by one worker. |
Usage | For thin plate transfer, such as shipyard and iron ball office |
■ Square Electronic Lifting Magnet
| |
Characteristic | Hoist crane is suitable for transporting or sorting steel plate by one worker. -It is possible to carry one or several sheets at the same time according to the carrying capacity by adopting strong ferromagnetic. (Adsorption power adjustment function) -By adopting the blackout compensation system, the steel plate can be lowered to the adsorption state during an unexpected blackout. -There is no damage to the product during transportation, and productivity improvement is increased by more than 300%. -Absolutely safe from industrial accidents with a design of 3 times or more safety rating (international safety standard). -Completely construct from design to manufacture and installation, and supply of radio controller is available according to choice. |
Usage | For transporting heavy plates to shipyards and steel ball offices It is mainly suitable for transporting or sorting steel plates, and can also be made for semi-finished product transfer. |
Specification (mm) |  |
■ Angle Lifting Magnet
| |
Characteristic | Strong magnetism can control the adsorption power, and one person can use the work efficiently and safely. |
Usage | ① Use It is suitable for carrying or sorting for angle cutting or conveying to angle yard. ② Applicable fields Rebar, angle sales, cutting, workplace (shaped steel) |
■ permanent magnet reefma
| |
Characteristic | -No power switch permanent magnet lifting magnet -Prevention of industrial accidents with absolute safety of 3 times safety factor and thorough quality control. -Can be used as a flat plate and cylinder as one. -ON / OFF operation is simple -Rare earth neodymium magnet material for ultra-strong adsorption (4 times stronger than general magnets) -Small size and light weight improve work efficiency |
Usage | -Used to transport iron plate, round bar, mold material, etc. -Steel sales site, for transporting steel plate |
Specification (mm) |  |
■ Annular Electronic Lifting Magnet
| |
Characteristic | It is suitable for conveying large round bar or pipes. It is equipped with electronics, which can adjust the suction power and add safety accident protection function in case of power failure. |
Usage | Mainly suitable for conveying round rods or pipes |
본 사이트는
Internet Explorer 8 이하 버전을
지원하지 않습니다.
Internet Explorer 9 이상으로 업데이트 하거나
크롬, 파이어폭스, 오페라, 사파리 최신 브라우저를 이용해 주십시오.
불편을 드려 죄송합니다.
