Airtec GlassModify Date : 2018-11-21 05:03:34

▣ Airtec Glass

※ High light transmittance and diffusivity

: Measurement results of illuminometer under the same lighting conditions (LED direct lighting) are shown below. In other words, even if the cover material is different under the same lighting conditions, a relatively high illuminance increase can be obtained.

※ color reproduction

: The graph below shows the reflectance of the visible light spectrum. Airtech Glass has a constant reflectance in all visible color range (400 ~ 700nm). This is intuitive to the color reproduction of the product. Reflectances that respond differently to different color gamuts do not allow accurate representations of various natural colors. Therefore, Airtec Glass realizes uniform reflectivity for all colors by implementing achromatic plate, which enables accurate expression of all colors without distortion.

※ Processability

: ᆞ Excellent moldability, easy to manufacture three-dimensional signboard, lighting cover, etc. by vacuum molding. PP, the raw material, is the material with the lowest moisture absorption among plastic resins. *** ASTM D570 (Measurement of weight increase after 24 hours immersion in 23 ° C) -PP (0.1% or less), PMMA (1% or less) High moisture absorption is a major cause of poor molding and poor adhesion of adhesive sheets. Thomson processing (wood mold) is possible and can be developed into various secondary products.

※ Impact resistance, weather resistance

: Airtec Glass's excellent impact resistance is about twice that of acrylic, making it suitable for outdoor use. Airtec Glass is produced with UV prescription and has excellent weather resistance.

※ Smoke toxicity

: World's only new light diffusing plate that passed the British Industrial Standard smoke toxicity test BS-6853. The Toxicity Index of Airtec Glass is 0.68 (less than 1.6 allowable smoke toxicity standard of train interior plate), and it is the safest light diffusion plate that does not involve toxic gas in case of fire burning. Undetected Halogen component of HCL (hydrogen hydrogen), HCN (hydrocyanic acid), HBr (hydrogen bromide), HF (hydrogen fluoride)

※ Antistatic

: Unlike acrylic and PC with electrical polarity, Airtec Glass is made of non-polar PP raw material, so it is less polluted by adsorption of fine dust.